NEW DEVELOPMENT 2021 | #11 FORD Focus IV ST
- 31 мая 2021 г.
Car and engine specification:
for FORD Focus IV ST Estate, Type DEH, 2020--> | FORD Focus IV ST Hatchback, Type DEH, 2020--> =>
2.3L EcoBoost 206KW (with GPF) | 2.3L EcoBoost 206KW (with GPF)
REMUS AXLE-BACK-SYSTEM
- 100% stainless steel
- Powerful sound
- Performance and torque increase
- Light weight construction
- Made in Austria
INFOBOX:
- Axle-Back-System: 202020 1500 + 202020 9999 or 202120 9999 + tail pipe set! No vehicle modifications required!
- Racing-Axle-Back-System: 202020 1600 (no EC type approval) + 202020 9999 or 202120 9999 + tailpipe set! No vehicle modifications required!
The use of racing products and products which do not have EC approval is generally not permitted on public roads
When fitting REMUS sports silencers, cat-back systems and cat replacement pipes designed for use on closed tracks, it is advantageous to carry out an ECU remapping, in order to exploit the optimum performance of the exhaust system and to prevent the check engine from lighting up.
| Part Nr. | Descpription |
| 202020 1500 |
Sport exhaust centered (absorption principle) Original tube Ø 60 mm - REMUS tubeØ 70 mm incl. connection tube with spherical connection for mounting of the the sport exhaust. Installation/fitting at the serial mounting points. Can only be used in combination with set of outlet tubes 202120 9999 or 202020 9999. Including mounting material |
| 202020 1600 | RACING Y-tube / sport exhaust replacement tube Original tube Ø 65 mm - REMUS tube Ø 70 mm |
| 202120 9999 | Set of outlet tubes consisting of: (only for Ford Focus IV ST Turnier) |
| 202020 9999 | Set of outlet tubes consisting of: (only for Ford Focus IV ST Hatchback) |
| Choose from following tail pipe package | |
| 0026 70SGR | stainless steel tail pipe set 2 tail pipes Ø 102 mm angled, straight cut, chromed, with adjustable spherical clamp connection |
| 0026 70SR | stainless steel tail pipe set 2 tail pipesØ 102 mm angled, chromed, with adjustable spherical clamp connection |
| 0026 70CSR | Carbon tail pipe set 2 Carbon tail pipes Ø 102 mm angled, Titanium internals, with adjustable spherical clamp connection |
| 0026 80SABR | stainless steel tail pipe set 2 tail pipes Ø 115 mm angled, engraved, Black Chrome, with adjustable spherical clamp connection |
| 0026 80SAR | stainless steel tail pipe set 2 tail pipes Ø 115mm angled, engraved, chromed, with adjustable spherical clamp connection |
DISCLAIMER
The products of REMUS Innovation GmbH („REMUS“) are distributed worldwide. REMUS and its affiliates shall not assume any obligations, warranties, guarantees or other liabilities for the fact that the products manufactured by REMUS comply with the applicable law of the respective country of destination or may be used without (official) approval. This applies equally to products approved in Austria, which are subsequently manipulated, modified, edited or otherwise interfered or changed by the respective buyer, so that it no longer has its original condition.
The buyer shall be solely responsible for obtaining all whatsoever approvals and permissions required by the respective national law for suchlike products and shall be solely responsible for ensuring that the products manufactured by REMUS comply with the approvals required for the respective usage in the country of destination.
Intended use in Austria:
Products manufactured by REMUS without (EC-)approval are only eligible for usage at motor sport events or tests within the meaning of KFG 1967. They are not intended for vehicles used on public roads. The buyer is solely responsible for obtaining the permissions where applicable required by the applicable law for the intended purposes/usage. In no event a whatsoever claim shall be constituted by the buyer against REMUS and its affiliates arising from or in connection with required approvals for public road usage.
